Precision Machinery Systems,Inc. - Vertical Trash Compactors
 
Precision Machinery Systems, Inc.
Search Catalog Go!
Home About Us Industries Served Contact Us/RFQ
Trash Compactors
Auto-Pak
International Dynetics
Aluminum Can & Polystyrene Recycling Equipment
Toronita
Precision Machinery Systems, Inc.

635 Hay Street
York, PA 17403

Tel: 717-846-6800
Fax: 717-843-0529
Email:

All Categories > Auto-Pak Trash Compactors > Vertical Trash Compactors > View Items 
    Download PDF Download PDF     Email Email This Page     Save To Favorites Save To Favorites

Vertical Trash Compactors

 width=
Check up to five results to perform an action.  width=


DD-30 Series
The DD-30 is a vertical compactor which uses much less floor space than its horizontal counterparts. Primarily intended for hand feeding from front, it may also be adapted for connection to a trash chute. Completely self-contained and aesthetically pleasing, it may be installed anywhere by simply plugging in its electrical power cord. Despite its compact size, the unit has sufficient power to produce compaction ratios as high as 10 to 1 to fill a 6.84 cu. ft. trash bag with 50-200 lbs of compacted trash. Ram stroke and hydraulic pressure are both adjustable to control size and weight of compacted package. A positively latched loading door with electrical interlock prevents operation when door is open. The electrical system includes a 1 HP, 115/230 volt, single phase internally protected drip-proof motor, with 115 volt control circuit.

There are three models in the Series. The Model DD-30 is a hand fed machine. The Model DD-30C has a section on the rear of the machine to receive trash from the building trash chute. The Model DD-30CPF also has a chute section, as well as an additional hydraulic cylinder which precompacts trash in the chamber prior to the vertical ram coming down.



Model 4500 - Opened

larger image
Model 4500 - Closed

larger image


Request InformationCompare Items   Results per Page : 
  Results 1 - 3 of 3 1 

Item #

Chamber Capacity

Compaction force, max, M

Ram face pressure, max, M

Volume displacement

Cycle time

Size, D x W x H

Weight, without container

Container Type

Motor power, AC, 60 Hz

Motor Horsepower

Feed Type

DD30 6.8 cf 7,850 lbs 20.4 psi 28.2 cy/hr 32 seconds 21 x 34 x 78.5 inches 1,200 lbs Single Bag 115V, 1 phase 1 HP Manual
DD30-C 6.8 cf 7,850 lbs 20.4 psi 28.2 cy/hr 32 seconds 48 x 34 x 78.5 inches 1,350 lbs Single Bag 115V, 1 phase 1 HP Manual or Chute
DD30-CPF 6.8 cf 7,850 lbs 20.4 psi 28.2 cy/hr 32 seconds 48 x 34 x 78.5 inches 1,450 lbs Single Bag 115V, 1 phase 1 HP Manual or Chute
  Results 1 - 3 of 3 1 
© 2009 Precision Machinery Systems, Inc. All rights reserved